Energy Saving Pulp Slurry Dipping Machine for Investment Casting

 
DZJ series dipping machine is a special equipment for wax mold dipping in investment casting industry. The machine is small in size, simple in structure and easy to maintain. The slurry bucket is rotated and the L-shaped paddle plate is fixed, so that the mixing is fast and uniform, with low noise. The dipping operation is convenient, safe and reliable.
Organization instructions

1. The inner slurry barrel of the machine is made of stainless steel, which greatly reduces the adverse effects of the material on the slurry. It can be used after passing the leakage test. The ellipticity of the pulp bucket is less than 5 mm. The outer layer adopts the orifice plate as the safety shield, which not only plays a safety protection role, but also does not affect the heat dissipation of the whole equipment.
2. (Note: ø1300mm slurry drum triangle belt type B, length is 1250mm)
3. Transmission principle
Motor reducer---------belt drive-----------slewing bearing----------slurry bucket



Electrical control

The electrical control adopts the comprehensive safety protection of the motor, which is simple and reliable to operate and more convenient to maintain. (Note: The internal current adjustment knob must be adjusted according to the requirements of the common rate in the meridional direction, before it can play a protective role)

 Equipment use and maintenance

1. It should be ensured that the pulp bucket is concentric with the axis of rotation, and the offset of the pulp bucket can be adjusted through the adjustment screw on the rotating disc.
2. Check and adjust the side clearance and bottom clearance between the L-shaped paddle board and the slurry bucket, and there must be no scratches between the two.
3. Press the green or red button (green start, red stop) on the starter, and observe whether the direction of rotation of the pulp bucket is correct. (Should be clockwise rotation)
4. Pour the slurry into the barrel, the height of the slurry surface should be 3 to 5 cm from the upper edge of the barrel. It should be kept running during slurry preparation to prevent the slurry from sinking and damaging the L-shaped stirring plate during startup.
Please check the tightness of the belt once a week and make adjustments to avoid belt wear and slippage.
5. It is recommended to use 00# semi-fluid butter as the lubricating oil for the reducer of this machine.
6. When using a new machine (or replacement parts for a reducer) for the first time, replace the oil with a new one after 7 to 14 days of operation. In the subsequent use process, check the quality of the oil regularly. For impurities, decomposition, aging and deterioration The oil must be replaced at any time. Under normal circumstances, it must be checked and replaced every 4 to 8 months.

Transport package

Packed with steel structure and MDF to ensure the safety of equipment during transportation.




About us

Founded in December 1993, Dongying Dongsheng Casting Co., Ltd. is one of the largest and earliest factories engaged in the development, development and production of precision casting equipment. The company is located in the hinterland of Shengli Oilfield in the beautiful Yellow River Delta.
    According to the development requirements of precision casting enterprises, the company has determined the development concept of products with high efficiency, innovation, energy saving, environmental protection, high quality, safety and reliability, and is aggressive and striving to be in line with international standards. The company has passed the ISO9001: 2000 international quality management system certification and the EU CE certification. In May 2014, it was selected by the China Foundry Association as "the leading enterprise in the foundry equipment industry in China's foundry industry"
    As a member of China Precision Casting Association, the company is willing to develop together with colleagues in the precision casting industry with first-class equipment, first-class service and first-class reputation, and create brilliant together.
    We are the best vendor in the running market. Our own factory van make sure the stable shipping time and the best quality with a reasonable price. We also have the best service in the city, if u have any question, please feel free to connect with us.

Address: No. 17, Chuanghui Road, Oilfield Fusion Industrial Park, Niuzhuang Town, Dongying District, Dongying City, Shandong Province

Website: dongshengcasting.en.made-in-china.com  

FAQ:
Q1: How long can it be delivered after the order is placed?
Most of our machines are customize ordered, they can be delivered within 30-60 days after the order is placed;
Q2:How can I pay for the money for the machine.
We accept 30% as a deposit and the balance need to be paid by T/T before the machine shipping out.
Q3: What should I do if I find quality problems in the process of using my product?
In case of quality problems, if you need after-sales service, you can contact us through wechat / whatsapp: for communication and solution; our engineers provide 24-hour online guidance to solve the problems.
If you need to replace the parts, we will provide them to you in the first time through international express after paid.
Q4: Can I choose to buy equipment through Made-In-China company?
If you buy our products for the first time, we will fully cooperate with your choice, and you can buy them in any way.
Q5: Does the machine have an English manual and warranty card?
Each machine has a professional English operation manual. The warranty period of our machine is one year, except for human factors or wearing parts.
In addition, we can provide electronic version of the English manual.
Q6: The delivery time of products without stock is too long for 30-60 days.
First of all, we will speed production to meet your needs.
In addition, the long delivery time is because our technicians need to carefully check and debug the equipment to ensure the quality of the machine.
Q7: What if I choose the wrong machine?
We have pre-sales engineers with rich professional knowledge. According to your products, we provide the most suitable machines and solutions. Before placing an order, we make sure you don't choose the wrong machine. If it happen, we will solve the problem with you.
Q8: Who is responsible for the installation and debugging of the machine I purchased?
We the seller are fully responsible to send our engineers within two weeks from the date of the containers arrival to the buyers factory to commissioning the machine and training the staff of the buyer, the buyer should be responsible for a round trip economy ticket, a hotel and any other necessary accommodations for the seller's engineers.